Draft Local Planning Policy 3.27: Environmentally Sustainable Design

eco house.png

Overview

The submission period concluded on Friday, 9 October 2026.

A report will now be prepared for Council to consider submissions.

Submitters will be notified prior to the draft Policy being considered by Council.


The draft Policy aims to support more sustainable residential development by encouraging:

  • Energy-efficient building design;
  • Renewable energy generation;
  • Water conservation measures;
  • Urban greening; and
  • Climate-responsive development outcomes.

The draft Policy proposes:

  • Minimum sustainability requirements;
  • A flexible points-based assessment framework for applicable developments;
  • Assessment through the development approval process; and
  • Support for more sustainable, resilient and environmentally responsible development.

To view draft Local Planning Policy 3.27: Environmentally Sustainable Design, please click here(PDF, 468KB). 


The Process

The draft Policy was open for comment from Friday 13th September 2026 to 5pm on Friday 9th October 2026.

With the conclusion of the submission period, the Town will now review the submissions received and prepare a report back to Council for final consideration, which is expected to occur by the end of 2026.

If approved by Council, the Policy will be published on the Town's website and will take effect from the date of publication.

Frequently Asked Questions

Where would the draft Policy apply?

The draft Policy proposes to apply to all applications for development approval that require assessment against the Residential Design Codes Volume 1 and include:

  • new single houses;
  • new grouped dwellings;
  • new ancillary dwellings; and
  • significant additions and/or alterations to existing single houses or grouped dwellings.

The draft Policy is not proposed to apply to applications assessed against the Residential Design Codes Volume 2 - Apartments, mixed use development, non-residential development, or change of use applications.

Will this be a new approval process?

No, it will be required as part of the Development (planning) Application. It is similar to other existing local planning policies that may require upfront information or development proposals to meet certain criteria.

What types of sustainable design measures are required?

For new single houses and grouped dwellings, the Policy sets out some minimum requirements such as:

  • minimum 100 sustainability points (refer below);
  • PV solar system of 3kw capacity;
  • 3,000l rainwater tank or an approved grey-water reuse system; and
  • roof structure to not exceed a solar absorptance value of 0.45

For significant additions and/or alterations and ancillary dwellings, the Policy sets out some minimum requirements such as:

  • minimum 75 sustainability points (refer below)
  • inclusion of any sustainability design measures that may exist; and
  • roof structure to not exceed a solar absorptance value of 0.45

Sustainability Points

Appendix 1 of the Policy provides the checklist of items that contribute towards the minimum 100 (or 75) point score and includes some specific design measures such as passive solar design, larger and battery storage solar PV system, EV charger, waterwise landscaping and water saving fixtures. Alternative sustainability measures not listed in the Policy and Appendix 1 may also be supported.

What is a ‘significant addition and/or alteration’?

The Policy defines this to mean "additions and/or alterations where the proposed additional floor area is greater than 50% of the total area of the area of the existing dwellings, enclosed by the exterior walls, including all enclosed attached and detached structures (excluding outbuildings).

What does ‘solar absorptance’ mean?

The Policy defines this as meaning "the fraction of the total incident solar radiation that is absorbed by the roofing material, with the remainder being reflected". This measure is to support lighter more reflective roof colours and/or materials and discourage darker and/or more absorbtance roof colours and/or materials.